Two-component micro fine polyester filler designed for evening scratches
resulting from processing a filling filler. It is also used for evening
minor scratches on coated surfaces with no need of using a filling
putty. It is easy to apply and spread on the surface without leaving
pores. It i..
Two-component polyester filler with addition of special aluminium powder. It is characterized by much lower grade of shrinking than in case of other fillers, very good flexibility, adhesion to the surface, high tolerance of temperature changes and resistance to mechanical vibrations. It can be used ..
Two component putty, designed for filling hollows and unevenness. Thanks to the use of light fillers 1L of the filler weighs 1,25 kg (1L of a traditional putty weighs 1,65 kg). It forms coats of good adhesion to primed and plain surface. It has a lot of flexibility, which makes it possible to use it..
Two component putty, designed for filling hollows and unevenness.It forms coats of good adhesion to primed and plain surface. It has a lot of flexibility, which makes it possible to use it on elements subject to mechanical vibrations. It can be applied on large surfaces, it does not flow down or shr..
Two component polyester filler used for filling hollows and evening scratches on elements made of plastic materials (polyamides, copolymers of styrene, polyester-glass laminates, etc.), and particularly on elements subject to impacts. It is characterized by high flexibility and superb adhesion which..
Fills irregularities and hollows of the ground before applying the top coat. It is characterized by high flexibility, which makes it possible to use it on elements prone to mechanical vibrations. It can be applied in thick layers – up to 5mm. It is irreplaceable in filling significant cavities; it d..
The PROFI filler is designed for filling unevenness and hollows of the
surface before applying a top coat. It is marked by high flexibility,
and it is soft in sanding, which enables it to be used on elements
susceptible to mechanical vibrations. It can be applied in thick coats
(up to 5mm), ..
Two component polyester filler containing specially cut glass fiber
which increases mechanical resistance of the product. Advisable for
filling hollows and reinforcing the areas weakened by corrosion or rust.
It has very good filling properties and good adhesion to the surface.
Polyester filler MICRO GLASS is reinforced with glass fiber. Thanks to
the use of elastic polyester resins and short fiber glass it is much
more flexible than the filler GLAS, having at the same time high
mechanical resistance. As it is fast and easy to process, it can be used
even on large ..
This product is designed for filling smaller or bigger irregularities and hollows before the application of a primer. Putty 3 in 1 provides reinforcement, filling and finishing. Contains optimal quantity of glass fibres responsible for the effect of reinforcement, and differentiated granulation guar..
Spray filler is designed for filling scratches resulting from processing previously applied filler coats. To be applied by air spraying. Thanks to good thixotropy it does not flow down and it can be applied in relatively thick layers even on large vertical surfaces. It is marked by good filling prop..
UNI filler is designed for filling unevenness and hollows of the surface
before applying a top coat. It is characterized by fine-grained
consistency and not very high flexibility. Fairly hard, it results in
coats of good adhesion to undercoated and plain surfaces. It is
recommended for mecha..