Preparation based on bitumen and mineral fillers, designed for
protecting car chassis against corrosive and erosive effect of weather
conditions. It can be applied with a gun or a brush. Unlike car body
protection agent "ANTIGRAVITEX", it shall not be covered with top coats...
SEAM SEALANT is a one component product designed for sealed and welded areas. It is cured by evaporation of the thinner at about 200C. Dry coat is characterized by high flexibility and good adhesion to the surface. It does not drip and leave scratches. It can be covered with any acrylic top coat...
This remover is a specially prepared product to be used for cleaning and
removing grease from the surface before lacquering. Effectively removes
such contaminants as dust, grease, wax, oils, silicon in the air, etc.
It is used straight before applying the enamel. It increases adhesion
Thinner for bases is a mixture of adequate thinners which results in a
product with definite evaporation temperatures. Designed for thinning
most base coatings available on the market. Ensures proper application
and drying of the thinned product...
Coating in spray designed for painting and renovating: wheel rims and other wooden or metal surfaces. In case of plastic surfaces of poor adhesion it is recommended to use adhesion increasing agent RANAL. Content of special filings causes the effect of aluminium rim...
Car window adhesive is a one component high viscosity polyurethane
product, polymerizing under the influence of moisture contained in the
air. It is characterized by excellent adhesion, elasticity and
durability. It can be used also for fixing various plastic elements to a